1 11

Modular System - Double Bolt Holder Setup (MDL-HLDR-DBL)

Modular System - Double Bolt Holder Setup (MDL-HLDR-DBL)

€60,00
€0,00 €60,00
Sale Sold out
Shipping calculated at checkout.
Compatibility

Product Description

This UPBOLT setup is designed for holding 16 bolts on the crossbow (two bolt holders with 8 bolts each) on the crossbow and easy sequential bolt feed into crossbow (aka tactical magazine reload to prevent it becoming empty). 



Crossbow model / magazine compatibility

  • for a single bolt setups
    • Cobra R9, Cobra RX, Cobra Siege stock configuration
    • EK Archery models replicas
      (e.g. Cheep Steel Sheep Shot crossbows)
  • Cobra Siege, Cobra RX Adder with repeating magazine
    • with UPBOLT V2 repeating magazine
    • other repeating magazines

Bolts compatibility

  • both 7.5'' bolts and 15'' bolts from EK Archery supported
  • other aftermarket bolts with same diameter

Package content

MDL-HLDR-DBL - Double Bolt Holder setup
  • Bolt Holder - 2 item
  • Quick Picatinny Fixator - 1 item
  • Fixation variator - 1 item
  • Screws, Alen key

See bolt holder based setup demonstration.

Important: Crossbow bolts, Cobra crossbow, bipod & bipod adapter, optical aiming devices shown in the illustrations are not part of the package.

🢣 Any question before you order from us?



1. Why should I buy this solution? 
This might be the best solution to hold up to 8 bolts on your crossbow. Easy to use setup and configuration. And, thanks to friendly design, it can be quickly attached or detached on picatinny rail in a seconds. 
 
2. How to use this solution?
Initial setup should take just 5 minutes of your time, after that all the setup with bolts can be mounted on a picatinny rail in a seconds.
 
3. Is this a reliable solution?
We have designed and tested this system so that you can enjoy something that is intuitive for daily use and yet flexible enough for demanding requirements. All our products are tested intensively, constantly improving based on customer feedback and secured by warranty. 
 
4. Production materials
The system is very redundant. Most of the details produced from PCTG, but some details that needs extra redundancy produced from CFR.

All plastic details are 3D printed.

You might also want to look on one of those addons & accessories:
Precaution measures:
This upgrade kit is safe and reliable, we have tested it with hundreds of shots. 
However, all standard precaution rules should be followed using this product, including, but not limited to:
1) always check crossbow elements to function properly
2) ensure safe crossbow cocking not to harm yourself and people around
3) before shooting always check that bolt seats are properly in the right position. 
 
Responsibility disclaimer:
This upgrade kit is provided "as is" and the producer does not take any responsibility for any direct or indirect consequences. By applying this kit to your crossbow you agree to take all risks to yourself, like evaluation of model compatibility, damage for any part of the equipment, surrounding people, and environment. If you do not agree to those terms, please do not buy this product.
View full details