EK Archery Cobra RX & R9 Conversion Guide

Cobra System RX & R9 • Conversion Guide

Convert Your Cobra RX or R9 into a Repeating Crossbow

The EK Archery Cobra System R9 and Cobra System RX share the same core frame as the repeating RX Adder—they just ship in a single-shot configuration.

Instead of buying a brand-new crossbow, you can upgrade your existing bow to full RX Adder compatibility in two clear steps:

Step 1 • Upgrade Frame
Bring your RX or R9 up to Adder level (choose a limb + rail power upgrade or an affordable grip-and-rail kit).
Step 2 • Add Magazine
Mount your preferred repeating magazine—matching your limb style and bolt length goals.

You might start your journey as an owner of this model:

Cobra System RX

CR-090BA-130

Single-shot tactical setup equipped with stock 130 lb limbs.

Cobra System R9

CR-090BA CR-090B

Single-shot compact or deluxe setup equipped with stock 90 lb limbs.

Part 1: Step Up to Adder Level (Choose 1 of 3 Build Tiers)

A repeating magazine requires an Adder-style rail, trigger mechanism, and grip handle. Pick the upgrade path that matches your power goals and budget:

Option 01

Powerful RX Adder Build

Parts:
B30096 Adder 2.0 Kit +
B30097 Simple Grip

Best for: Maximum recurve power in a single conversion.

Step up to 180 lb recurve limbs while converting your bow to Adder level. The B30096 kit supplies the 180 lb limbs, Adder rail and trigger mechanism, reinforced cocking bar, and 14 × 7.5" carbon bolts.

Because no grip handle is included, pair it with the simple B30097 Adder Grip (handle only, no rail).

Option 02

SIEGE-Style TX Compound

Parts:
CR-0981B-130 TX Kit +
B30097 Simple Grip

Best for: Compound efficiency and built-in anti-jammer safety.

Bring Cobra Siege-style compound limb efficiency to your RX or R9. The CR-0981B-130 kit includes TX compound limbs, special heavy 7.5" TX bolts (240 gr), and the Adder rail and trigger mechanism—currently the only kit in EK Archery’s lineup with built-in anti-jammer safety.

Pair it with the simple B30097 grip handle; you can reuse your stock RX/R9 cocking lever as-is.

Optional Add-On: Want extra cocking leverage—especially alongside Option 1 (180 lb limbs) or Option 2 CR-0981B-130? Check out EK Archery’s Adder Extended Cocking Lever Kit B30096-1.

Part 2: Pick Your Repeating Magazine

Once your Cobra RX or R9 is upgraded to Adder level, mount the repeating magazine that fits the bolts and shooting style you want:

EK Archery Official

EK Archery Adder Magazine Set 2.0

Best for: An all-official EK Archery build for standard 7.5" short bolts.

B10044A

EK Archery’s updated 7-bolt factory magazine fits all three Adder-level conversion options above. It is a solid, straightforward option if you only plan to shoot standard 7.5" short bolts and pair it with an anti-jamming setup.

Tip: Option 2 CR-0981B-130 already includes built-in anti-jammer safety in its trigger mechanism.
3rd-Party Option

GoGun Adder Magazines (V2 / V3)

Best for: Shooters prioritizing maximum short-bolt capacity over versatility or weight.

7.5" Short Bolts Only Mags 

GoGun produces aftermarket Adder-rail magazines—including a 7-shot aluminum-side model and an 18-shot double-stack magazine—built strictly for 7.5" short bolts in repeating mode. While they offer high short-bolt capacity, they carry a higher price point, add noticeable top-end weight and bulk, and cannot cycle 15" long bolts or broadheads.

TX Caution: If pairing with Option 2 (CR-0981B-130), verify front clearance and strictly use heavy 240 gr TX bolts rather than standard light bolts.
Comparing systems? Choose UPBOLT V2 if you want lower weight, 15" long-bolt capability, and broadhead support at a lower cost.

Quick Reference Conversion Matrix

At-a-glance parts map for converting your Cobra System RX or R9 to a repeating setup.

Your Build Goal Step 1: Adder-Level Parts Step 2: Recommended UPBOLT Magazine Other Compatible Magazines
Budget Conversion
Keep stock 90 / 130 lb limbs
B30097A Adder Grip Kit UPBOLT V2 Magazine (Adder / RX / R9) B10044A (7.5" only), GoGun (7.5" only)
Maximum Power
180 lb recurve limbs
B30096 + B30097
Optional: B30096-1
UPBOLT V2 Magazine (Adder / RX / R9) B10044A (7.5" only), GoGun (7.5" only)
TX Efficiency + Anti-Jammer
Siege-style compound limbs
CR-0981B-130 + B30097
Reuses stock lever; optional B30096-1
UPBOLT V2 Magazine (TX / Siege) B10044A (7.5" TX bolts), GoGun (check clearance; 240 gr TX bolts only)