UPBOLT V2 Adder RX Version

Stock Cobra RX Adder
Adder 2.0 upgrade kit B30096
Cobra RX / R9 converted by B30097A
Standard repeating Adder magazine lock you into short 7.5" practice bolts.
The UPBOLT 8-Bolt V2 Universal Magazine is a lightweight, open-frame modular system built for shooters who want both 7.5" short bolts and 15" long R-Series bolts - whether you shoot a Cobra SIEGE, RX Adder, or converted Cobra RX / R9.
Every UPBOLT V2 build uses one of two front-end configurations matched to your crossbow’s limb and rail geometry:
MAG-V2-AD

Stock Cobra RX Adder
Adder 2.0 upgrade kit B30096
Cobra RX / R9 converted by B30097A
MAG-V2-TX / MAG-V2-SG

Cobra SIEGE (95 lb & 150 lb)
Cobra RX Adder, RX, or R9 with compound CR-0981B-130
Find your starting EK Archery Cobra model below to see the exact parts required for a complete 8-bolt repeating build:
CR-120BP95 CR-120BP
Why? Turning a single-shot Cobra SIEGE compound crossbow into an 8-bolt repeater without changing limbs or triggers.
CR-120BP95 or CR-120BP
Keep your existing SIEGE compound limbs and trigger mechanism intact—installation takes about 15 minutes with no advanced tools required. You gain an 8-bolt repeating magazine capable of cycling both 7.5" bolts and 15" long bolts with practice points or hunting broadheads.
CR-097AD130A
Why? RX Adder owners keeping stock 130 lb limbs who want 8-bolt capacity and 15" long-bolt / broadhead capability.

Use your existing 130 lb limbs and Adder trigger mechanism as-is. Replacing the factory top magazine unlocks 8-bolt capacity, anti-jam reliability, and effortless switching between 7.5" and 15" bolts.
CR-0981B-130
Why? Combining Siege-style compound efficiency and built-in anti-jammer safety with 15" bolt versatility.
CR-090BA-130 CR-0981B-130 
Upgrade your front end with EK Archery’s CR-0981B-130 kit—which includes TX compound cam limbs and the Adder rail/trigger with built-in anti-jammer safety—then mount the SIEGE / TX version of the UPBOLT V2 Magazine to match the TX front geometry.
B30096
Why? Maximum 180 lb recurve draw weight paired with heavy 15" hunting or target bolts.
CR-090BA-130 B30096 
Step up to EK Archery’s 180 lb recurve limbs, reinforced trigger mechanism, and cocking lever via B30096, and pair them with the Adder version of the UPBOLT V2 Magazine to send 15" bolts downrange with maximum recurve energy.
CR-090BA-130 CR-090B
Path A: Converting a single-shot Cobra RX or R9 into an 8-bolt repeating crossbow while keeping stock limbs.
CR-090BA-130 or CR-090BA or CR-090BB30097A 
Install the complete B30097A Adder Grip Upgrade Kit (grip handle, rail, trigger mechanism, and screws) to bring your RX or R9 to Adder level, then mount the Adder version of the UPBOLT V2 Magazine.
Path B: Converting a single-shot Cobra RX or R9 into TX style multi shot crossbow
CR-090BA-130 or CR-090BA or CR-090BB30097 CR-0981B-130 
Path C: Converting a single-shot Cobra RX or R9 into powerful 180 lb multi shot crossbow
CR-090BA-130 or CR-090BA or CR-090BB30097 B30096 
Complete your repeating setup with rail-mounted speed loaders and properly calibrated 2-vane R-Series bolts:
MDL-LDR / MDL-HLDR
UPBOLT V2 Magazine are compatible with
single or double Bolt Quick Loaders MDL-LDR-S, MDL-LDR-DBL

side Bolt Holders MDL-HLDR-S, MDL-HLDR-DBL, MDL-HLDR-LDR
Carry pre-loaded 8-bolt speed loaders right on your crossbow and reload in seconds.
7.5" & 15" 2-Vane
Always use 2-vane R-Series bolts (7.5" or 15") and verify that every bolt slides freely through the magazine before heading to the range.

Read our Bolt Usage Instructions for recommended bolt specs, 3-vane SIEGE re-fletching notes, and vane-repositioning videos.
Be the first to know about new collections and exclusive offers.